ClassicSeries 304 Stainless Steel Surface Mounted Sanitary Napkin Disposa- Satin Finish

Features:

• Type-304 stainless steel with all-welded construction; satin finish exposed surfaces
• Door has tumbler lock
• Self-closing panel covers disposal opening
• Removable, leak-proof, rigid molded polyethylene receptacle
• Measures 10-11/16″ width by 15-1/8″ height by 4-1/16″ depth

Materials:

• Cabinet 18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
• Door 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
• Disposal Panels (2) 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edges hemmed for safety. Secured to door and permanent panel with spring-loaded, full-length stainless steel piano-hinge. Equipped with international graphic symbol identifying sanitary napkin disposal.
• Waste Receptacle Leak-proof, rigid molded polyethylene. Removable for servicing. Capacity: 1.2-gal. (4.6-L).

Operation:

• Unit is equipped with a self-closing panel covering each disposal opening. Napkin disposal is emptied by opening door with furnished key and removing waste receptacle.

Installation:

• For partitions with particle-board or other solid core, secure with four #8 x 1-1/4″ (4.2 x 32mm) sheet=metal screws (not furnished), or provide through-bolts, nuts, and washers.
• For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed back-toback, then provide threaded sleeves and machine screws for the full thickness of partition.
• For plaster or dry wall construction, provide concealed backing to comply with local building coeds, then secure unit with #8 x 1-1/4″
  (4.2 x 32mm) sheet-metal screws.
• For other wall surfaces, provide fiber plugs or expansion shields for use with #8 x 1-1/4″ (4.2 x 32mm) sheet-metal screws, or provide
  3/16″ (5mm) toggle bolts or expansion bolts.